A concrete floor turns a pole barn or shed from a dirt-floored storage space into a workshop, garage or equipment building you can actually work in. We pour slabs for new and existing pole barns, storage sheds, detached garages and hobby shops across Brighton, Fenton, Pinckney, Hartland and the rural parts of Livingston County.
Slabs can be poured before the building goes up or inside a finished barn, and we can add aprons at overhead doors so vehicles roll in smoothly.
Building Slabs for Michigan Ground and Weather
Rural lots often have heavy clay or low spots where water sits, and both can lead to cracking and heaving if the ground is not prepared. Freeze-thaw cycles are tough on the exposed apron at the door, and trucks and tractors bring in road salt all winter. We focus on grade, base compaction and thickness suited to what you plan to park or store, with reinforcement and joints laid out so the slab stays flat and serviceable.
Pole barn slabs around Livingston County are often poured on rural lots where the soil can vary a lot from one corner to the other. We look at the ground, the grade and where water drains before setting forms, because a barn floor that sits low will collect water every spring. Many owners also plan ahead for floor drains, in-floor heat or thicker sections where heavy equipment or a vehicle lift will sit. Talking through how you plan to use the building now, and five years from now, helps us pour a floor that keeps working as your needs change. We also coordinate with your barn builder on post locations and timing, so the slab and the structure fit together cleanly.
Our Process, Step by Step
- 1
Plan the use
We ask what will go in the building, such as cars, tractors, RVs or a workshop, so the slab is designed for it.
- 2
Grade and base
The pad is graded, and gravel is placed and compacted.
- 3
Vapor barrier and reinforcement
A vapor barrier and steel reinforcement can be placed before the pour.
- 4
Pour and finish
Concrete is placed, leveled and finished smooth or broom finished.
- 5
Cut joints and cure
Control joints are cut and the slab is cured before heavy use.
Options Available
Smooth trowel finish
Easy to sweep, good for shops.
Broom finish
More grip for wet boots and tires.
Door aprons
Concrete approaches outside overhead doors.
Floor drains or slope
Planned slope or drains for washing equipment.
Frequently Asked Questions
Can you pour a slab inside an existing pole barn?
Yes, as long as we can get concrete to the building. We will look at access during the estimate.
How thick should my slab be?
It depends on the weight of what you will park on it. We will recommend a thickness based on your use.
Do you work in rural areas?
Yes. We are a family-owned, licensed and insured company with over 10 years of experience and serve a 50-mile radius around Brighton.